Mobile-Harddisk.nl uses cookies. Click here for more information. Accept
€ 181,–
€ 149,59 ex. 21% VAT

Ubiquiti UniFi AC In-Wall AP HD

in stock (6 units) | order before 18:00 = shipped today
  • Suitable for mounting in the wall
  • WiFi standard: 802.11ac Wave 2, 4x4 MU-MIMO
  • 1x Gigabit IN, 4x Gigabit LAN (1 with PoE out)
  • 802.3af / at PoE fed, and 48V PoE out

Product Description UAP-IW-HD

The Ubiquiti UniFi In-Wall HD is a compact dual-band wireless AC Wave 2 wall-mounted access point, with speeds of up to 300 Mbps (2.4 GHz) + 1733 Mbps (5 GHz). The device is equipped with 5 Gigabit Ethernet ports, one of which is suitable for powering a PoE device (48V PoE out).

In-wall access point
The Ubiquiti UniFi In-Wall HD is a compact and flat wireless access point that can be unobtrusively mounted on the wall. Due to its special design, this device is very suitable for offices and other spaces where access points must be placed out of sight. The UAP In-Wall HD achieves speeds of up to 300 Mbps at 2.4 GHz and 1733 Mbps at 5 GHz. The 802.11ac Wave 2 WiFi standard is used for a super-fast connection with multiple devices at the same time. The two integrated antennas ensure excellent coverage indoors.

Power over Ethernet
The Ubiquiti UniFi In-Wall HD has 4 Gigabit LAN ports for wired network equipment. When the access point is powered by an 802.3at PoE + switch, one of these ports supports 48V PoE passthrough. This allows you, for example, to provide a connected IP telephone or IP camera with power and data. The UniFi In-Wall HD can also be powered via 802.3af PoE, but the 48V passthrough function is then not available.

UniFi Controller
The Ubiquiti UniFi In-Wall HD is managed via the UniFi Controller. With this user-friendly software you can manage multiple access points centrally, but also gain insight into, among other things, the status of the network, the connected devices and the associated network traffic. The UniFi Controller provides a clear overview and is accessible on a PC, laptop, tablet and smartphone.

LED status lamp
With the help of the LED status light on the housing you can see at a glance what the status is of the Ubiquiti UniFi In-Wall HD. After a successful installation, the light will illuminate blue, indicating that the device is working properly. When you click on 'locate' in the UniFi Controller software, the light will flash. A blue light that flashes only occasionally indicates that the access point is isolated. All WLANs are then deactivated until an uplink is found.

For more information, please visit this products webpage.

Specifications

2,4 GHz Wifi speed 300 Mbps
5 GHz Wifi speed 1733 Mbps
Bridge Support Yes
Central management Yes
Ethernet ports 4
Ethernet Speed Gigabit Ethernet (1000 Mbps)
Outdoor/Indoor Indoor
PoE Support Yes
Wi-Fi Security WPA2, WPA, WEP, WPA-PSK
WiFi bands Dual-band
Warranty 2 year
EAN Code 0817882025485

Did you notice a wrong specification? Please let us know.

Performance
Maximum data transfer rate 1733 Mbit/s
2.4 GHz Yes
5 GHz Yes
Networking standards IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.11w,IEEE 802.1Q,IEEE 802.3af,IEEE 802.3at
Ethernet LAN data rates 10,100,1000 Mbit/s
Wi-Fi data rate (max) 1733 Mbit/s
Frequency band 2.4/5 GHz
Number of users 200 user(s)
MIMO Yes
MIMO type Multi User MIMO
Band Steering Yes
Airtime Fairness (ATF) Yes
Throughput 940Mbps
Web-based management Yes
Quality of Service (QoS) support Yes
Rate limiting Yes
VLAN support Yes
Transmitting power 26 dBmW
Wireless isolation Yes
Tagged VLAN Yes
Wi-Fi Multimedia (WMM)/(WME) Yes
Reset button Yes
Certification CE, FCC, IC
Protocols
Management protocols 802.1Q, QoS, WMM
Ports & interfaces
Ethernet LAN (RJ-45) ports 5
Internal RJ-45 ports quantity 1
WAN connection Ethernet (RJ-45)
Security
Security algorithms WEP,WPA,WPA-AES,WPA-Enterprise,WPA-PSK,WPA-TKIP,WPA2,WPA2-EAP,WPA2-TKIP
Antenna
Antenna gain level (max) 6 dBi
Antennas quantity 4
Integrated antenna Yes
Power
Power consumption (max) 23 W
Input voltage 44 - 57 V
Power over Ethernet (PoE) Yes
Design
Internal No
Product colour White
Placement Wall
LED indicators Yes
Software
Dynamic Frequency Selection (DFS) Yes
Operational conditions
Operating relative humidity (H-H) 5 - 95%
Operating temperature (T-T) -10 - 60 °C
Weight & dimensions
Width 86.7 mm
Depth 25.8 mm
Height 139.7 mm
Weight 210 g

Did you notice a wrong specification? Please let us know.

Live Chat
Offline.